Sonic switch "Integral - ABS"
Sonic switch "Integral-ABC" is designed for automatically switching the lighting in the porches, corridors and other rooms.
Sonic switch is produced in four modifications (for the darkened and semi-darkened corridors etc).
Switch ABC-1 is designed for the darkened places, automatically switching the lighting when voice sounds or other noises caused by people coming are appeared.
Switch ABC-2 is designed for the semi- darkened places. It has optical sensor for blocking of switching the lighting. When the lighting is below 5 lux and any noise is appeared, the switch is activated.
Switch ABC-3 is designed for the semi- darkened places. It is activated by ineffective the operation of sonic sensor (the continual noise caused by the transports, noisy music etc). Switch ABC-3 has a button with highlight bar allowing turning the lights forcedly, irrespective of the noise level.
Switch ABC-4 is designed for the darkened places needing the continual tell-tale lights.
In this case, the half of voltage is applying to the lamp and it uses the half-glow. When switch is activated the lamp uses full-glow.
- Supply voltage -220V, 50 Hz
- Initial voltage of the lamp - 110 V
- Maximum power handling - 500 VA
- Duration of the lighting (adjustable) - from 30 sec to 2 minute
- Noise level when the switch is activated (adjustable) - from 70 dB to 110 dB
- Light level blocking switching the lighting - 5 lux
- Size - 60x55x30 mm
Energy saving - till 80-90%. Life time of the glow lamps are increasing 20-30%, owing to reduced initial voltage when the switch is activated.